An injection molding machine is the main molding equipment for making thermoplastics or thermosetting plastics into various shapes.
of plastic products using plastic molding. Divided into vertical, horizontal, and all-electric.
| Instructions | unit | AM160B5S | ||
| Screw diameter | mm | 42 | 46 | 52 |
| Screw LD Ratio | L/D | 21.9 | 21.9 | 17.7 |
| Theoretical Shot volume | cm³ | 277 | 332 | 425 |
| Injection Weight(PS) | g | 252 | 302 | 387 |
| oz | 8.9 | 10.7 | 13.7 | |
| Injection Rate | cm³/s | 143 | 171 | 219 |
| Plasticizing Capacity | g/s | 36.8 | 44.15 | 48.36 |
| Injection Pressure | MPa | 213 | 177 | 139 |
| Screw stroke | mm | 200 | ||
| Screw speed | Rpm | 260 | ||
| Clamping Unit | ||||
| Clamping force | KN | 1600 | ||
| Tonnage stroke | mm | 445 | ||
| Space Between Tie Bars | mm | 470*470 | ||
| Max.mould Height | mm | 500 | ||
| Min.mould Height | mm | 180 | ||
| Ejector stroke | mm | 150 | ||
| Ejector force | KN | 58 | ||
| Jector Number | Piece | 5 | ||
| Power Unit | ||||
| Max.Pump Pressura | MPa | 17.5 | ||
| Major motor | KW(S) | 23 | ||
| Heater Power | KW | 8 | ||
| NO.of heater zones | unit | 3+1 | ||
| General Unit | ||||
| Machine Dimension( L×W×H) | m | 5.4*1.4*2.1 | ||
| Maching weight | Ton | 5.4 | ||
| Oil Tank capacity | L | 250 | ||